Premium Eichenholzrahmen

With every frame is included:

• plenty of velcro stickers to adhere the tile in the frame;
• a hook to hang up the wooden frame.

• Make sure the back of the tile and the frame is clean and dry.
• Peel off the paper backing from the velcro sticker to expose the adhesive.
• Place a velcro sticker in every corner on the back of the tile and press firmly for about 30 seconds.
• Place a velcro sticker halfway between each corner sticker. You will have 8 stickers in total.
• On every velcro sticker, now place another sticker, velcro sides touching.
• Peel off the paper backing of the upward facing velcro stickers to expose the adhesive.
• Place the tile in the frame in its centred position. Press down to make sure the adhesive of the stickers is firmly attached to the wooden frame. Hold for 30 seconds.
• Done!
• We recommend testing if the tile is properly adhered by giving it a few gentle pushes.
• Feeling confident? Hang up your frame and enjoy the view!
  

We don’t recommend to hang your tile above any precious objects or living beings, in the rare case the tile does fall down.

Returns are accepted within 30 days of receiving your order.

If your frame arrives damaged or something’s missing, send us a quick photo and we’ll send a replacement ASAP. No fuss, no extra cost.

• The frames are not meant to carry anything other than The Dutch Tile Project Tiles. We have designed these solely for use in combination with The Dutch Tile Project tiles. We cannot take responsibility for damage caused by usage of the hangers outside of this scope.
• Indoor use only. We don’t advise to hang up the frame and tile in direct sunlight or warm spots, as the heat might dry out the adhesive of the velcro stickers. We also advise against hanging the tiles in humid or wet areas, as this might reduce the efficacy of the adhesive.